FormBoss Galvabond Steel Garden Edging 2440mm

FormBoss Galvabond Steel Garden Edging 2440mm

Crafted from flexible, galvabond steel, this edging is ideal for highlighting and separating landscape features such as garden beds, pathways, lawns, steps, and pebble areas. It’s most commonly used as a flush edging system, providing a neat, neutral division that enhances your garden’s overall structure and design. Built to withstand Australian conditions, the Galvabond steel is manufactured by the Australian company Bluescope Steel through a rigorous hot and cold rolling process to ensure the steel has the best rust-resistant finish possible. When initially installed the edging will arrive shiny but will naturally weather over time for a more matte finish.  In addition, the garden edging can be easily painted to suit your project’s colour palette. 

Available in multiple thicknesses and heights — including 1.6mm, 2.0mm, and 2.5mm gauges, and heights from 75mm up to 580mm — FormBoss edging offers exceptional flexibility. Each 2440mm length can be manually curved onsite to a 500mm radius and trimmed to your desired size, making it simple to achieve precise results.

Please Note:

• Stakes are not included. We recommend placing one every 800mm (approximately three per length).
• For 90° corners, use the matching Galvabond steel corner piece.
• Profiles over 290mm high require angled stakes. Profiles under 290mm use the standard tapered stakes.

• 1x Connector. 
• 1x Length of Garden Edging. 
• 4x Screws.
  
• 2x Rivets. (Profiles 230mm and above).
• Can be cut onsite.
• Malleable material makes it easy to be curved into your desired shape.
• Starts with a shiny finish and naturally weathers over time for a neutral finish.

• Make: Galvabond Steel.
• Length: 2440mm.
• Manufactured in Australia.
• 10 Year Warranty.

• Remove any existing plastic or metal garden edging. 
• Mark out the proposed design: Stretch the string until taut for straight lines and use chalk or spray to mark out curves. 
• Prepare the soil: Dig out a furrow using a hand trowel along the lines you prepared. The depth of the trench should be 1/3 of the profile height.
• Start shaping the edging, along your curve, and provide even pressure along its curve. 
• Lay your edging into your pre-made furrow. 
• Trim any edging not required and join with the supplied connectors and screws.
• Adjust the height of your edging as necessary, and plant your stake into the ground and tap down the formboss edge onto each stake.
• Backfill with soil/mulch to your desired level.